SIKA 6470 Stone Chip Protection Coating 1lt – Black

Description SIKA 6470 Stone Chip Protection Coating Black 1lt Excellent adhesion performance to a wide variety of substrates Enhanced abrasion, impact and road salt resistance Outstanding low temperature behaviour with no running or dripping. USE SikaGard 6470 S is used as a spray applied anti-corrosion coating for quick repair of vulnerable, painted parts of vehicles such as door sills, wheel arches, front and rear aprons. It can also be applied as a sound-deadening product for example on wheel arches, etc. CHARACTERISTICS AND ADVANTAGES Equipment independent (aerosol) Enhanced abrasion, impact and road salt resistance Quickly over paintable Excellent adhesion performance to a wide variety of substrates Easy reproduction of original textures Great acoustic and damping properties No running or dripping. Remains flexible when dry Outstanding low temperature behavior Very fast drying PRODUCT BENEFITS Easy application with no running or dripping. Enhanced abrasion and road salt resistance Easy reproduction of original textures Great acoustic and damping properties Excellent adhesion performance to a wide variety of substrates Remains flexible when dry Outstanding low temperature behavior Good heat resistance Fast drying Quickly over paintable Usage Sikagard®-6470 is a spray applied anti-corrosion coating for repair and protection of vulnerable, painted parts of vehicles such as door sills, wheel arches and front and rear aprons. It can also be applied as a sound-deadening product for example on wheel arches, etc.Sikagard®-6470 shows very good adhesion on different paints, metal primers, metals and PVC without any pre-treatment.This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Surface preparation Surfaces must be clean, dry and free of rust, dust and grease. Bare metal must be pretreated to enhance corrosion resistance (e.g. uncoated steel, etc). Application Sikagard®-6470 can be applied by air-mix guns with an air pressure of 3 – 6 bar. Use either the Sika® SCP Gun (pressure cup type) or the Sika® UBC Gun (vacuum type) to apply the product. Shake can approx. 40 times before use. Cover adjacent surfaces prior to the spray process. Spray at room temperature and from a distance of approx. 25 cm in a grid motion to build up a continuous coat. Sikagard®-6470 can be applied haze-free and does not drip. Apply this product until the desired layer thickness is reached. If a thick layer is required, let layers dry in between. A wide variety of textures can be produced by altering the spray technique. Do not spray on parts of the brake, engine or exhaust system. Removal Uncured Sikagard®-6470 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.Do not use solvents on skin. Overpainting Sikagard®-6470 is overpaintable after approximately 60 minutes with most commonly used conventional paint systems (incl. water-based paint systems). Waiting time can be reduced by accelerated drying at max. 60°C. Due to the wide range of paints, adhesion and compatibility tests are necessary.